07 3204 9558 | sales@petroindustrial.com.au

0 item(s)

Danger Signs

Brady Danger Signs 

Danger signs provide warning when a hazard or a hazardous condition is likely to be life-threatening. The word "Danger" is featured inside a red oval inside a black rectangle. Danger signs comply to AS 1319 regulations.

Brady Sign Material Guide

Polypropylene

Our polypropylene material is highly recommended for outdoor use. It is UV stable and resists fading and cracking outdoors for three to five years. It is non-toxic and is Food Contact approved, conforming to AS 2070 (Plastic Materials For Food Contact and Use). Enduring temperatures of -40°C to 160°C, this polypropylene is fully recyclable and is an environmentally responsible alternative to PVC. Not only is the poly we use in our signs made from over 50% recycled material, but it is also certified as Carbon Neutral. All signs are 1.4mm thick with rounded corners and four corner mounting holes.

Self-Adhesive Polypropylene

These signs are our standard polypropylene with an adhesive backing. An industrial grade pressure sensitive adhesive backing has been applied to allow easy installation of signs by adhering to most flat, clean and dry surfaces in interior and protected exterior situations. It has a good temperature rating of up to 100ºC with excellent initial tack and long-term adhesion properties.

Self Adhesive Vinyl

This durable vinyl features a fully self-adhesive backing so you can adhere it to virtually any clean, dry surface. Our vinyl is manufactured to perform under a range of varying temperatures (-40°C to 80°C) and humidity. Well suited to curved or rough surfaces, just peel off the release paper and quickly apply. An expected indoor lifetime of five to eight years, our self-adhesive vinyl offers a long-term solution that is also highly resistant to fading, shrinking and chemicals.

Colorbond® Steel (Metal )

Our metal substrate is constructed from Bluescope Colorbond® Steel. Guaranteed to withstand temperatures of -40ºC to 80ºCand has an outdoor life expectancy of five to eight years. This material complies with two steel manufacturing standards AS/NZS 1365 and AS 1397. The 0.6mm thick material holds up well in windy conditions and is well suited to the outdoors. All metal signs come with rounded corners and four corner mounting holes.

Corflute

Manufactured from 3mm corrugated plastic, it is a lightweight, low cost and durable material. More rigid than solid polypropylene but flexible enough to mount on slightly curved surfaces. Ideal for short-term outdoor use, especially for temporary applications, such as construction and building sites.

Brady Ultra Tuff

For signs that will be exposed to abrasive chemicals, extensive UV, or the likelihood of graffiti, we highly recommend Brady UltraTuff signs. UltraTuff signs have a protective overlaminate which is manufactured from a highgrade polyester, with great abrasion resistance and good resistance to UV radiation and weathering exposure. It has excellent resistance to chemicals and solvents and is designed for use in harsh environments to protect the sign’s message.  The UltraTuff overlaminate can also be applied to any Brady sign. The film has a service temperature of -50°C to 150°C. It is ideal for use as an anti-graffiti protective overlaminate, although it is recommended to ensure the paint/ink is removed within 24 hours. Brady UltraTuff signs are guaranteed for 10 years.

Retro-Reflective Aluminium And Steel

Retro-reflective options are available in Colorbond® Steel or Capral Aluminium. Capral Aluminium is manufactured to comply to AS/NZS 1734 and is ideal for use where resistance to corrosion and strength are a necessity. Our Colorbond® Steel signs are manufactured in accordance with AS/NZS 1365 and AS 1397 and are one of our more robust sign materials, perfect for outdoor use. We only use Retro-Reflective material which complies to AS/NZS 1906.1, available in Class 1 and Class 2 options. Class 1 is the brightest, most durable retro-reflective material available.

Brady Glo™ Luminous

Brady offers an innovative solution for emergency and evacuation signage in the workplace. Our BradyGlo™ luminous material B-324, is available in polypropylene or self-adhesive polyester. BradyGlo™ is a non-toxic and non-radioactive material. It takes only five minutes of ambient fluorescent light to charge and will glow consistently for 10+ hours. This material meets and exceeds several international standards for safety and glow time. Recommended for internal use only.

DEFINITIONS

Upper Temperature Service Limit: Temperature above which material will fail in long term use. Information available on specific Material Technical Data Sheets.
Minimum Application Temperature: Lowest temperature at which you can apply the label to a clean, dry, smooth surface. Information available on specific Material
Technical Data Sheets.
Average Outdoor Durability: Average expected outdoor life of product will depend on user definition of failure, climatic conditions, mounting techniques, material colour, and printing inks used.
Chemical Resistance: Chemical Resistance information can be obtained from a specific material’s Technical Data Sheets
 

SAFETY SIGN VIEWING DISTANCE GUIDE

Signs should be large enough to view without straining the eyes when communicating safety messages to employees and/or visitors. Therefore, choosing the size of a sign is more than fitting it to the space you have available.

In order to comply with AS 1319, you must consider the environment, lighting and viewing distance – these factors will determine the size of sign required to suit your application.

The recommended minimum sizes as per AS 1319 are as follow. For a pictogram and worded sign in a factory or work environment, where lighting is good and the sign will be mounted in a reasonably prominent position:

  • Pictogram size is to be at least 15mm per metre of viewing distance
  • Text size:
  • Upper case: 5mm per metre of viewing distance
  • Lower case: 4mm per metre of viewing distance

Showing 1 to 32 of 114 products

Page:
  1. 1
  2. 2
  3. 3
  4. 4
Set Descending Direction

  • Keep Out No Access - Danger Sign

    Keep Out No Access - Danger Sign

    Item Code: DS-KONA
    $13.20


    * Required Fields

  • Acetylene - Danger Sign

    Acetylene - Danger Sign

    Item Code: DS-A
    $13.20


    * Required Fields

  • Do Not Enter - Danger Sign

    Do Not Enter - Danger Sign

    Item Code: DS-DNE
    $13.20


    * Required Fields

Showing 1 to 32 of 114 products

Page:
  1. 1
  2. 2
  3. 3
  4. 4
Set Descending Direction