Professional quality tank alarm with 3 input channels.
Designed to detect overfill, low levels or bund alarm situations on one, two or three tanks.
Suitable for use with diesel or biodiesel up to B100, oils or water. Diesel Exhaust Fluid option available.
230V, 110V or battery operation.
IP55 weatherproof enclosure.
Each channel can be used as an overfill, low level or bund alarm.
High power alarm sounder, 98db at 1m.
High visibility flashing zenon beacon.
Plug & socket field connections for quick & easy installation.
Test button checks probes, beacon & sounder.
No zenon beacon on battery versions but individual channel LED’s.
Relay outputs available.
Size: (mm) 163L x 115W x 250H.
110V OR 240V TANK ALARM KITS:
Each kit comes with a 230V alarm box, tank float switch c/w flat plate/gasket for fitting to any tank & 11⁄2” cap for steel tanks.
Our float switches are universal & can be used to detect an overfill/hi level, bunds or low level alarm.
Relay Option - Volt free contacts for each channel (1 relay output per channel)
Relay Option - Can be used to switch secondary equipment, sounders etc.
12V BATTERY TANK ALARM KITS:
Similar to units above but powered via internal batteries. (batteries supplied, type D x 4) No zenon beacon.
Battery life depends on number of test & alarm incidents.
Relay Option - Volt free contacts for each channel (1 relay output per channel)
Relay Option - Can be used to switch secondary equipment, sounders etc.
IMPORTANT WARNING NOTES:
The PETRO Tank Alarm MUST NOT be used to monitor petrol or other highly flammable liquids with a flash point below 55 degree C.
It is designed for use with diesel, gas oil, water, hydraulic oil and heating oil. Can be used with Anti-freeze or Adblue if optional stainless steel float switch assembly is fitted.
It must not be sited adjacent to a petrol dispenser or in any other hazardous zone.
It must not be sited below ground level.
Installation of this equipment should be carried out by a qualified fuel installation engineer.
The installation must conform to all relevant electrical and local authority regulations and standards.
Only PETRO float switches can be used with the PETRO alarm.
