Skip to content
šŸ“ž 1300 987 789 | sales@petroindustrial.com.au
šŸ“ž 1300 987 789 | sales@petroindustrial.com.au

Description

PETRO Drain Warden

To prevent solids, silt and hydrocarbons from entering waterways via storm water drains.Ā  Trap is placed below the grate preventing damage in high traffic areas.

FEATURES:

  • Integral bypass permits flow when the trap is blocked with sediment or during periods of high water flow.
  • Sediment trap is made from 200 micron geotextile fabric.
  • Excess flow points avoid blockage during periods of high water fall.
  • Overall width is 1.2m x 1.2m. (Drain should be no larger than 1m square).
  • Replacement pillow is an Oil & Fuel pillow 58 x 37cm (code: PPFO).

APPLICATION:

  • An oil & fuel absorbent pillow is inserted into the trap to collect hydrocarbons as they pass over the pillow.
  • The pillow will absorb about 10 litres of oil.
  • To install, place the drain warden into drain and cut off excess fabric leaving a health border.
  • Drain warden should be checked for silt and debris after rain fall.

    RANGE:

    Description

    ST1.2N 1.2m x 1.2m with NO Bilge Sock

    ST1.2B 1.2m X 1.2m with Bilge Sock (BS400)

    Ā 

    Contact PETRO industrial'sĀ team of bulk fuel storage and dispensing specialists for more informationĀ today!