Skip to content
šŸ“ž 1300 987 789 | sales@petroindustrial.com.au
šŸ“ž 1300 987 789 | sales@petroindustrial.com.au

Description

PETRO Tank Alarm - 3 Channel Float Operated.

FEATURES:

  • Professional quality tank alarm with 3 input channels.
  • Designed to detect overfill, low levels or bund alarm situations on one, two or three tanks.
  • Suitable for use with diesel or biodiesel up to B100, oils or water. Diesel Exhaust Fluid option available.
  • 230V, 110V or battery operation.
  • IP55 weatherproof enclosure.
  • Each channel can be used as an overfill, low level or bund alarm.
  • High power alarm sounder, 98db at 1m.
  • High visibility flashing zenon beacon.
  • Plug & socket field connections for quick & easy installation.
  • Test button checks probes, beacon & sounder.
  • No zenon beacon on battery versions but individual channel LEDā€™s.
  • Relay outputs available.
  • Size: (mm) 163L x 115W x 250H.
  • ATEX and IEC/IECex certified

110V OR 240V TANK ALARM KITS:

  • Each kit comes with a 230V alarm box, tank float switch c/w flat plate/gasket for fitting to any tank & 11ā„2ā€ cap for steel tanks.
  • Our float switches are universal & can be used to detect an overfill/hi level, bunds or low level alarm.
  • Relay Option - Volt free contacts for each channel (1 relay output per channel)
  • Relay Option - Can be used to switch secondary equipment, sounders etc.

12V BATTERY TANK ALARM KITS:

  • Similar to units above but powered via internal batteries. (batteries supplied, type D x 4) No zenon beacon.
  • Battery life depends on number of test & alarm incidents.
  • Relay Option - Volt free contacts for each channel (1 relay output per channel)
  • Relay Option - Can be used to switch secondary equipment, sounders etc.

IMPORTANT WARNING NOTES:

  • The PETRO Tank Alarm MUST NOT be used to monitor petrol or other highly flammable liquids with a flash point below 55Ā degree C.
  • It is designed for use with diesel, gas oil, water, hydraulic oil and heating oil. Can be used with Anti-freeze or Adblue if optional stainless steel float switch assembly is fitted.
  • It must not be sited adjacent to a petrol dispenser or in any other hazardous zone.
  • It must not be sited below ground level.
  • Installation of this equipment should be carried out by a qualified fuel installation engineer.
  • The installation must conform to all relevant electrical and local authority regulations and standards.
  • Only PETRO float switches can be used with the PETRO alarm.
  • This product must not be used if it is damaged.

OVERFILL ALARM 240V Includes:

  • 3 x Relays
  • 3 x Float Switches
  • Xenon Flashing Light
  • Audible Alarm
Contact PETRO industrial'sĀ team of bulk fuel storage and dispensing specialists for more informationĀ today!

    Ā